Table of Contents
Advertisement
C-56
C-56
Centralized Day/Night Mode Change - CCIS
General Description
This service feature switches the DAY/NIGHT mode of Satellite Nodes which are linked to the Main Node via
CCIS, in accordance with the DAY/NIGHT mode switching [A-3] at the Main Node.
Operating Procedure
Note:
Node B - Node E are Satellite Nodes.
1.
Press the NIGHT key on the Attendant Console for each Tenant; the NIGHT lamp illuminates. The mode
of Satellite Node for each Tenant changes from Day mode to Night mode.
TN=2
TN=3
TN=4
TN=5
Note:
To confirm Night Mode, see Night Connection-Fixed - CCIS [N-15].
Service Conditions
1.
A Main Node can control DAY/NIGHT mode changeover for a maximum of 16 remote nodes.
Page 866
Centralized Day/Night Mode Change - CCIS
ATT
TN=2
TN=3
TN=4
TN=5
[Node B]
[Node C]
TN=1
ATT
CCIS
[Node B]
[Node C]
TN=1
TN=1
INDEX19=04
IINDEX19=05
[Node A (Main Node)]
CCIS
CCIS
CCIS
[Node D]
[Node E]
TN=1
TN=1
CCIS
CCIS
CCIS
[Node D]
[Node E]
TN=1
INDEX19=03
CCIS
TN=1
:Day Mode
:Night Mode
TN=1
INDEX19=02
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
