Table of Contents
Advertisement
Programming (cont'd)
STEP 3:
ASFC - Assign the stations to receive the feature LAST NUMBER CALLED a Service Feature Class
that allows SFI = 44.
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
STEP 1:
ANPDL - Reserve a number level for feature access and cancel. Assign Connection Indexes, CI = N,
H, B; Normal (N), Hooking (H), and Busy (B) (applicable to any feature assigned to this level). Assign
NND in accordance with a predetermined numbering plan.
STEP 2:
ASPAL - Assign an access code to LAST NUMBER CALLED, SID = 44. Assign Connection Status
Index (CI) for Normal (N) service.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Last Number Called - Single-Line Station
L-6
Page 435
Advertisement
Table of Contents
