Table of Contents
Advertisement
General Description (cont'd)
Situation 3:
When Station B is talking
with Station C after Station
B holds (Consultation Hold -
term
All Calls - D
Station A while Station A
and B in a conference (Add-
On Conference - 8 Party [A-
121]). PS/ISDN terminal
equipment cannot be
applied to this feature.
• Station A: Original Call (conference
member)
• Station B: Operating station for this
feature (conference
member)
• Station C: Second call, which is not
conference member, called
by Station B (it can be
disconnected by this
feature)
Operating Procedure
See General Description.
Service Conditions
1.
This feature is available when System Data 1 Index 803 Bit 1 = 1 is assigned.
2.
When there is a call terminated at Chinese specification MFC trunk in calls related to this feature, this
feature is not available.
3.
ISDN terminal equipment cannot be applied to operating station of this feature.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Consultation Hold Release
ELC
[C-17])
Station A
Station B
Station C
CFTB
card
Note 1:
This feature is not available when operation station (Station B) is in
Add-On Conference - 8 Party [A-121] while holding Station C
(Station/Trunk) using TRANSFER key.
LC
Station A
(HOLD)
Station B
Station C
CFTB
card
Only when System Data 1 Index 803 bit 2 = 1 is assigned, Station C
Note 2:
can be disconnected.
When ASFC command SFI 131 = 1 (Add-On Conference - 8 Party)
Note 3:
is assigned to Station B, Station C is called in to Add-On Conference
- 8 Party [A-121].
Procedure for D
MUX
After station B presses
DISC key
MUX
Procedure for Analog Station
After station B goes
switch hook flash
term
ELC
Station A
Station B
Station C
(ROT)
CFTB
card
LC
Station A
Station B
Station C
(ROT)
CFTB
card
C-169
MUX
MUX
Page 267
Advertisement
Table of Contents
