Table of Contents
Advertisement
S-9
Interactions (cont'd)
e.) If the Pilot sets CALL FORWARDING-BUSY LINE [C-2] to Station B: During a Call Forward-
Override call from Station B to the Pilot, if the Pilot station is idle, the Pilot will ring. If the Pilot
station is busy, the call will hunt.
Call to Station A will
forward to Station B
Call to Pilot
Call to Pilot bypasses
Call Forward-Busy, rings
Station in Hunt Group
Busy Station
Idle Station
Ringing Station
Phantom Station
6.
STATION MESSAGE DETAIL RECORDING [S-10]: The number recorded is the telephone number
where the call actually terminates.
7.
STATION HUNTING-CIRCULAR supersedes the ATTENDANT CAMP-ON WITH TONE
INDICATION [A-1] and CALL WAITING-TERMINATING [C-12] features.
8.
When using a Phantom Telephone Number (PHTELN) for the pilot station, consider the following:
• Whether to use the PHTELN to start the station hunt or not can be selected by the command APHNL.
When using the PHTELN, assign "1" in the PH parameter. If not, assign "0".
• When PH = 1: Station hunt starts by dialing either the pilot station number (telephone number) or its
Phantom Telephone Number. Both numbers can be the pilot number.
Page 666
Station Hunting - Terminal
Station B
Station A, Call Forward-
Busy to Station B, busy
with Pilot Hunt call
Pilot
Station A
Phantom
Other Hunt Group
Available
Secretary
NEAX2400 IPX Feature Programming Manual
Hunt
Ringing
NDA-24297, Issue 1
Advertisement
Table of Contents
