Table of Contents
Advertisement
C-154
General Description
This feature allows a user to pick up a trunk or station call that is put on hold by a second user. The user can
accomplish this by dialing an access code followed by the telephone number that is holding the call.
Operating Procedure
1.
Make a trunk or station call to Station A.
2.
Station A places the call in progress on hold.
3.
From Station B, dial the access code and Station A's telephone number.
4.
Station B is connected to the station or trunk call that is on hold at Station A.
Service Conditions
1.
Only stations in the same tenant can use this feature.
2.
This feature remains in effect even after hold timeout and the station is in the re-ring state.
3.
This feature also overrides the Exclusive Hold feature (a call that is put in Exclusive Hold can be picked
up by using this feature).
Programming
STEP 1:
ASPA - Assign the access code for this service. SRV = SSCA (Service Code Appendix) SIDA = 103
STEP 2:
ASFC - Assign Service Feature Class that allows SFI = 150
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Call Hold Pick Up
Call Hold Pick Up
C-154
Page 257
Advertisement
Table of Contents
