Table of Contents
Advertisement
D-87
General Description
This feature gives multiple D
regardless of their idle or busy status. An intercom group member can override another intercom station in a two-
party intercom connection. This service is referred to as an Intercom Bridge.
Operating Procedure
To originate
1.
The intercom station presses the DICM key and goes off-hook within five seconds.
2.
Dial the desired INTERCOM telephone number; receive ringback tone. The calling D
3.
The desired INTERCOM station answers the call and is connected to the calling station.
To answer
1.
The DICM key will flash, indicating an incoming DIAL INTERCOM call. The called station may also
hear distinctive three-burst ringing. The called D
2.
If the called station is already engaged in a conversation with a non-intercom call, the station may press
the HOLD key and answer the DIAL INTERCOM call by pressing the DICM key. Ringing will stop.
To bridge
1.
When two stations are engaged in a DIAL INTERCOM call, a third station, belonging to the same DIAL
INTERCOM group, presses the DICM key and goes off-hook. The called and calling D
2.
A three-party conference is established. The called stations may hear a Warning Tone. The option for
hearing the tone is preassigned in system data. The called and calling D
3.
If Intercom Bridge service is denied, the D
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Dial Intercom
Dial Intercom
term
users the ability to simultaneously call any other member of the intercom group,
ICM
(Time Display)
ICM
(Time Display)
OVERRIDE
(Time Display)
CONF
(Time Display)
term
CONF REST
(Time Display)
Dialed Intercom Number
XX
term
displays:
Calling Intercom Number
XX
Intercom Number
XX
displays:
term
displays:
term
s display:
term
s display:
D-87
Page 301
Advertisement
Table of Contents
