Table of Contents
Advertisement
M-19D
General Description
term
This feature allows a D
Operating Procedure
To send a message from a D
1.
Dial the desired D
2.
Press the MSG key; the LCD displays:
Service set tone is heard.
3.
At the called D
To review the messages
1.
Press the MSG key; the LCD displays:
Note:
When the station number exceeds 12 digits, MSG is not displayed.
To return the message
1.
Lift the handset or press the SPEAKER key while message is displayed.
2.
Press the MSG key; the calling station is automatically redialed.
Service Conditions
1.
This feature is only available between two D
directed to a D
displays:
2.
Messages can only be sent if the called station is in the idle or busy condition.
3.
Messages cannot be sent while engaged in calling and recalling from CALL TRANSFER - ALL CALLS
[C-11] and from CONSULTATION HOLD - ALL CALLS [C-17].
4.
A maximum of four messages may be received at any one D
will display:
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Message Reminder - D
Message Reminder - D
to leave a MESSAGE REMINDER at another D
term
term
station, receive ringback tone or busy tone.
MESSAGE SET
term
, the MSG LED will light to indicate a message has been set.
Calling Station
MSG XXXXXXXXXXXX
term
that does not have the MESSAGE REMINDER feature, the calling station's LCD
MESSAGE REST
MESSAGE BUSY
(Time Display)
term
Called Station
XXXX
(Time Display)
hr.
min. AM/PM
XX: XX
(Time Display)
term
sets, both of which have the MSG key. If a message is
(Time Display)
term
term
term
.
AM
. If a fifth message is attempted, the LCD
M-19D
Page 483
Advertisement
Table of Contents
