Table of Contents
Advertisement
M-26
Service Conditions (cont'd)
6.
When activating this feature via the FCCS network, a maximum of 32 nodes can be assigned as the remote
node. Stations accommodated in remote node are controlled by the Message Waiting Lamp by the MC.
MC #1
MC
#2
Interactions
1.
In case a Message Center exists on each side of the FCCS network and CCIS network:
a.) Message data will be transmitted to the MC on the side of the CCIS network (in the figure below,
MC#1), provided that a call from any of the FCCS network nodes (in the figure, node A/B/C)
terminates to an ATTCON/UCD station of the non-FCCS node (in the figure, node D).
b.) Message data will be transmitted to the MC on the side of the FCCS network (in the figure below,
MC#2), provided that a call from the non-FCCS node (in the figure, node D) terminates to the
ATTCON/UCD station of any of the FCCS network nodes (in the figure, node A, B, C).
MC #1
Page 506
Message Center Interface
Group A
Node A
Node B
FCCS
Node C
CCIS
Node D
Group B
FCCS Link
Node B
FCCS
FCCS
Node A
MC: Message Center
MC #1
Node C
Node D
MC #2
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
MC
#2
Advertisement
Table of Contents
