Table of Contents
Advertisement
I-9
General Description
This feature allows a sub-line appearance, assigned to a D
Operating Procedure
To originate
1.
Press the Intercom sub-line appearance.
2.
Lift the handset or press the SPEAKER key; dial tone is heard.
3.
Dial an Intercom station, receive ringback tone. The display will show:
4.
The called party answers and the conversation begins.
To answer
1.
Ringing is heard from the Intercom sub-line.
2.
Press the Intercom sub-line appearance. The display will show:
3.
Lift the handset or press the SPEAKER key.
4.
The conversation can then begin.
Service Conditions
1.
An Intercom sub-line appearance cannot be the Prime Line of a D
2.
An Intercom sub-line appearance cannot call any station or trunk in a system other than another Intercom
sub-line appearance.
3.
An Intercom sub-line appearance cannot activate any features.
4.
An Intercom sub-line appearance must be assigned as a Software Line Appearance.
5.
This feature is only available for D
6.
Intercom sub-lines must be allowed the service feature restriction of SFI=70.
7.
FCCS link is not available for this feature.
Interactions
1.
As an example for Group Calling application, the following conditions exist:
System Station Numbering:
5XXXX and 6XXX
Speed Calling Access:
3 (Assigned in ASPA)
100 Groups of Ten Stations
Group Calling Station
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Intercom Calling
Intercom Calling
ICM
(Time Display)
ICM
(Time Display)
term
s.
term
, to be used for INTERCOM CALLING.
XXXX
XXXX
term
.
I-9
Page 399
Advertisement
Table of Contents
