NEC NEAX2400 IPX Programming Manual page 947

D-76D
Interactions
1. DATA INTERFACE-AUTOMATIC ANSWER - CCIS [D-65] may not be activated if the D
is in the DND mode.
2. CALL FORWARDING-BUSY LINE - CCIS [C-45]: This feature can be activated to an idle station that
has set DO NOT DISTURB - CCIS.
Programming
STEP 1: AKYD - When assigning key data for the D
TN: 1
STN: Station Number
TP: Type of D
RING:
0: No Ringing
1: Ringing All Lines
2: Ringing on Prime Line Only
3: Flexible Ring Assignment, enables RG parameter
KYN: Key Number (1-40)
KYI: Service Index
0: Key Not Used
1: Feature Key
2: Multi-line Key
KD: Not assigned for Feature Key
FKY: Feature Key Number
FKY = 50, DO NOT DISTURB.
STEP 2: ADSL - Assign DND key; Assign SN=0 (Idle) and FKY=50 (Do Not Disturb).
This command is used for assigning a function to each soft key.
STEP 3: ASFC - Select an indication type (REST/DND) on the display of a D
station that has been set to DO NOT DISTURB.
SFI = 114 Calling Party DND Indication (D
Page 904
Do Not Disturb - D
term
0/1:
term
- CCIS
term
, assign the following:
term
) 0/1: REST/DND.
NEAX2400 IPX Feature Programming Manual
term
station
term
when it terminates to a
NDA-24297, Issue 1