Table of Contents
Advertisement
M-25
M-25
Multiple Call Forwarding - Don't Answer
General Description
This feature permits a call to an unanswered station to be forwarded, multiple times, to preprogrammed idle stations
that do not have Call Forwarding set.
Operating Procedure
To set from an individual station
1.
Lift the handset; receive dial tone.
2.
Dial the specific CALL FORWARDING - DON'T ANSWER [C-3] access code; receive special dial tone.
3.
Dial the desired target telephone number; receive service set tone.
To cancel from an individual station
1.
Lift the handset; receive dial tone.
2.
Dial the specific CALL FORWARDING - DON'T ANSWER [C-3] cancel code; receive service set tone.
To set from the ATTENDANT CONSOLE [A-3]
1.
Press an idle loop key.
2.
Dial the specific CALL FORWARDING - DON'T ANSWER [C-3] access code; receive special dial tone.
3.
Dial the TENANT [T-12] number (2 or 3 digits).
4.
Dial the originating telephone number.
5.
Dial the desired target telephone number; receive service set tone.
To cancel from the ATTENDANT CONSOLE [A-3]
1.
Press an idle loop key.
2.
Dial the specific CALL FORWARDING - DON'T ANSWER [C-3] cancel code; receive special dial tone.
3.
Dial the TENANT [T-12] number (2 or 3 digits).
4.
Dial the originating telephone number; receive service set tone.
Service Conditions
1.
If the called station does not answer and MULTIPLE CALL FORWARDING - DON'T ANSWER [M-25]
is set at the called station, the call is forwarded to the designated station.
2.
There is no limit to the number of times a call can be forwarded by MULTIPLE CALL FORWARDING
- DON'T ANSWER [M-25].
3.
A call cannot be forwarded to the originating station.
4.
CALL FORWARDING - DON'T ANSWER [C-3], CALL FORWARDING - BUSY LINE [C-2] and
CALL FORWARDING - ALL CALLS [C-5] combined:
a.) After a CALL FORWARDING - DON'T ANSWER [C-3] forward has been made, up to five
CALL FORWARDING - ALL CALLS [C-5] or CALL FORWARDING - BUSY LINE [C-2]
forwards may be made.
b.) If the fifth or last CALL FORWARDING - ALL CALLS [C-5] or CALL FORWARDING -
BUSY LINE [C-2] destination after a CALL FORWARDING - DON'T ANSWER [C-3] is busy,
the originally called station will continue ringing.
c.) If a station has CALL FORWARDING - BUSY LINE [C-2] or CALL FORWARDING - ALL
CALLS [C-5] to the originating station set, the call will not be forwarded to the originating
station. The originally called station is rung.
Page 498
Multiple Call Forwarding - Don't Answer
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
