Table of Contents
Advertisement
A-99
A-99
Authorization Code Display Elimination
General Description
This feature eliminates AUTHORIZATION CODE [A-20] and FORCED ACCOUNT CODE [F-7] from being
term
displayed on the D
for security purposes.
Operating Procedure
Procedure 1
(Access code for auth code/forced account code) + (SST) + (auth code/forced account code) + (DT) + (OG
access code) + (OG code)
Dial: (DT) - 10 + (SST) - 1234 + (DT) - 9 - 753 - 7000
term
Display on D
XXXX = authorization code/forced account code
Procedure 2
(OG access code) + (OG code) + (SPDT) + (auth code/forced account code)
Dial: (DT) - 9 - 753 - 7000 + (SPDT) - 1234
term
Display on D
XXXX = authorization code/forced account code
Service Conditions
1.
When the station dials the AUTHORIZATION CODE/FORCED ACCOUNT CODE, Xs appear on the
display.
2.
LAST NUMBER CALL [L-6] and SAVE AND REPEAT - D
information, but display Xs when these feature keys are pressed.
3.
SPEED CALLING SYSTEM - D
same time when this feature key is pressed.
4.
ACCOUNT CODE [A-18] is displayed on D
5.
This feature applies only to the calling party's D
6.
This feature applies for the following dialing procedures:
OG access without held party
OG access with held party
7.
If the network is connected by a trunk (including a CCIS trunk), and AUTHORIZATION CODE/
FORCED ACCOUNT CODE is requested at the other node, this function is not applied.
8.
The calling party needs to confirm SPDT/SST if AUTHORIZATION CODE/FORCED ACCOUNT
CODE is required. The first digit of AUTHORIZATION CODE/FORCED ACCOUNT CODE may or
may not be recognized as AUTHORIZATION CODE/FORCED ACCOUNT CODE, if the inter-digit
timing immediately before the AUTHORIZATION CODE/FORCED ACCOUNT CODE is too short.
Programming
ASYD - Assign SFI 137 = 1 to the originating terminal.
Page 64
Authorization Code Display Elimination
is: 10XXXX97537000
is: 97537000XXXX
term
[S-3D] feature keeps dialed digits, and all digits are displayed at the
PROCEDURE
Attendant
term
.
term
.
BEFORE DIALING
Yes
Yes
No
NEAX2400 IPX Feature Programming Manual
term
[S-24D] features keep dialed
AFTER DIALING
Yes
Yes
No
NDA-24297, Issue 1
Advertisement
Table of Contents
