Table of Contents
Advertisement
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
STEP 1:
ASYDL - System Data 1, Index 241, Bit 6. 0/1 = When the length of Caller ID exceeds the limit, only
the former/latter part of data appears on the LCD.
System Data 1, Index 390, Bit 0. Caller ID display pattern on the LCD. 0/1 = Calling Number/Calling
Name has priority.
System Data 1, Index 390, Bit 2. when using D
displaying Caller ID. 0/1 = Out/In service.
When Calling Number is output to SMDR, the following expanded format is used:
S
O
!
T
X
System Data 1, Index 288, Bit 5. Expanded SMDR Output for SMDR A Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 290, Bit 5. Expanded SMDR Output for SMDR B Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 292, Bit 5. Expanded SMDR Output for SMDR C Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 294, Bit 5. Expanded SMDR Output for SMDR D Apparatus. 0/1 = Out/In
Service.
System Data 1, Index 296, Bit 0. Output of Calling Number (ANI Information). 0/1 = Out/In Service.
Assign data "1".
System Data 1, Index 300, Bit 0. 0/1 = Billing information is sent to the Main Node in Expanded
SMDR format if CENTRALIZED BILLING - CCIS [C-55].
System Data 1, Index 578-581, Bit 0.
STEP 2:
ARTDN - Assign route class data for the C.O. trunk.
15-LSG
When Calling Number is output to SMDR:
10-SMDR :1
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
SMDR Output Expansion - ANI/CPN
Note
1
2
K
H
OFFICE CODE OF
/
CALLED PARTY
I
(FOR CCIS)
/
J
H = Origination
I = Termination
J = Station-to-Station
:3
50-DPLY
:1
term
2-line LCD, the lower LCD can be used for
96
104
AUTH
CODE
A = ANI Information
Identifier:
0 = Output is not available
1 = Displayed
2 = Display denied
3 = Service is not available
4 = Origination from public pay phone
Note: For 0, 2 and 3, the ANI number is not output.
129 130
131
162
A
ANI
Z
E
NO.
T
X
Z = End of SMDR
Information
Page 731
S-129
Advertisement
Table of Contents
