NEC NEAX2400 IPX Programming Manual page 136

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

Service Conditions (cont'd)
d.) MUSIC ON HOLD [M-7] when the other party has pressed the HOLD key.
e.) dialing of telephone number.
f.) trunk origination or called-number dialing.
g.) calls to or talking to Attendant.
h.) THREE-WAY CALLING [T-2].
i.) CONSULTATION HOLD - ALL CALLS [C-17].
j.) calls by VOICE CALL - D
k.) Call Waiting ringback tone with Call Waiting set.
l.) secretary calls to boss by BOSS-SECRETARY TRANSFER [B-11].
13.
MW can be cancelled for a station in the same module group using the MY Line during:
a.) conversation with the calling party.
b.) ringback tone for station calling.
c.) MUSIC ON HOLD [M-7] when the other party has pressed the HOLD key.
d.) THREE-WAY CALLING [T-2].
e.) CONSULTATION HOLD - ALL CALLS [C-17].
f.) calls by VOICE CALL - D
g.) Call Waiting ringback tone with Call Waiting set.
14.
CALL WAITING [C-12, 13] set from any other station causes the MW Indication for the party setting the
call waiting to go off.
15.
THREE-WAY CALLING [T-2] established by EXECUTIVE RIGHT-OF-WAY - D
the MW Indication connected to the interrupted party to go off when the interrupting party presses the MW
CANCEL button. When using a soft key, press the MW OFF to cancel.
16.
FCCS link is not available for this feature.
Interactions
1.
Use of the following features has no effect on this feature. BOSS-SECRETARY MW LAMP CONTROL
can be set/cancelled to a station that has previously activated any of the following features:
a.) DO NOT DISTURB - D
b.) CALL BACK - D
c.) CALL BACK - D
d.) CALL FORWARDING ALL CALLS - D
e.) CALL FORWARDING DON'T ANSWER - D
f.) CALL FORWARDING BUSY - D
2.
When the boss' line is answered by the secretary, the following services may be activated either by the
secretary or by another station towards the secretary. These services will not interfere with the secretary's
ability to set/cancel MW.
a.) PRIVACY - D
b.) CONSULTATION HOLD - ALL CALLS [C-17]
c.) CALL WAITING - ORIGINATING [C-31] set to boss' station
d.) CALL WAITING - ORIGINATING [C-31] set from boss' station
e.) ATTENDANT CAMP ON WITH TONE INDICATION [A-1] set to boss' station
f.) THREE-WAY CALLING - D
g.) NON-EXCLUSIVE HOLD - D
HOLD [D-32].
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Boss - Secretary - Message Waiting Lamp Control
term
[V-2D].
term
[V-2D].
term
[D-21D]
term
[C-1D] set to boss' station
term
[C-1D] set from boss' station
term
[P-14D]
term
[T-2D]
term
term
[C-5D] will not follow forwarding data
term
[C-3D] will not follow forwarding data
term
[C-2D] will not follow forwarding data.
[N-7D], EXCLUSIVE HOLD - D
B-8
term
[E-1D] causes
term
[E-4D] or DUAL
Page 93

Advertisement

Table of Contents
loading

Table of Contents