Table of Contents
Advertisement
Programming
STEP 1:
ASYD - System 1, Index 69, Bit 0:
Processing for a case where the transfer destination station does not answer the call within a
predetermined period of time. 0/1 = the transferring station is recalled/the transfer destination station is
continuously rung, or if the Call Forwarding - Don't Answer is set at the destination station, Call
Forwarding - Don't Answer is executed. Index 247: Assign the timer value of No Answer Timer for
Blind Transfer to Station.
STEP 2:
ASFC - Assign the following data to the SFC of the station:
SFI = 103:
RES:
Also, when ASYD, SYS-1, Index 69, b0 = 1 has been assigned, assign the following data to the SFC of
the station:
SFI = 104:
RES: 0/1 =
FCCS Programming
No unique programming is required for the FCCS network.
Note:
System timers may be set on a network basis in ASYDN.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Blind Transfer To Station
Assign the timer value of No Answer Timer for BLIND TRANSFER TO STATION.
0/1 = Index 140 / Timer value assigned by ASYD, SYS-1, Index 247
0 = Index 140
1 = Index 247
Processing in a case when the transfer destination station does not answer within a
predetermined period of time.
The transfer destination station is continuously rung / Call Forwarding - Don't Answer
is executed if it is set at the transfer destination station.
B-18
Page 103
Advertisement
Table of Contents
