NEC NEAX2400 IPX Programming Manual page 377

E-1
E-1
General Description
This feature enables selected users, upon encountering a busy condition at an internal station, to bridge into the busy
connection.
Operating Procedure
To enter a busy connection
1. Dial the busy station; receive busy tone.
2. Switch hook flash; receive special dial tone.
3. Dial the EXECUTIVE RIGHT-OF-WAY access code; warning tone is sent.
4. The calling station is now bridged into a three-way call.
Service Conditions
1. Two tone bursts of.08 second duration are transmitted upon activation of this feature to alert the connected
parties that an executive override connection is being made.
2. The LCD display on the interrupted party's D
STATION NUMBER DISPLAY - D
3. EXECUTIVE RIGHT-OF-WAY is denied if the busy station is:
a.) dialing or in a LINE LOCKOUT [L-3] state
b.) listening to a tone
c.) being rung
d.) protected from override via CLASS OF SERVICE - INDIVIDUAL [C-15]
e.) being connected to an ATTENDANT CONSOLE [A-3] loop
f.) activating a conflicting feature, such as:
ATTENDANT OVERRIDE
BOSS - SECRETARY OVERRIDE - D
BUSY VERIFICATION
CALL HOLD
CALL TRANSFER
CALL WAITING - ORIGINATING
CALL WAITING - TERMINATING
CONSULTATION HOLD - ALL CALLS
DATA LINE SECURITY
DATA PRIVACY ON DEMAND
DIAL ACCESS TO ATTENDANT
EXCLUSIVE HOLD - D
NON-EXCLUSIVE HOLD - D
OFF-HOOK QUEUING
OUTGOING TRUNK QUEUING
PRIVACY - D
PRIVACY RELEASE
THREE-WAY CALLING
VOICE CALL - D
Data Call through a Data Adapter / Data Call through a Data Module
In any of the above instances, the calling station will receive reorder tone.
Note:
Page 334
Executive Right-of-Way
Executive Right-of-Way
term
[I-10D] has been programmed in system data.
term
term
term
term
term
will give an indication only if INTERMEDIATE
term
NEAX2400 IPX Feature Programming Manual
[A-7]
[B-5, B5-D]
[B-3, B-9]
[C-6, C-6D]
[C-10, C-11, C-50, C-54]
[C-31]
[C-12]
[C-17, C-58]
[D-12, D-66]
[D-17, D-68]
[D-2, D-71]
[E-4D]
[N-7D]
[O-7, O-11]
[O-2, O-2D]
[P-14D]
[P-18]
[T-2, T-2D]
[V-2, V-7]
NDA-24297, Issue 1