Table of Contents
Advertisement
F-31
F-31
General Description
This feature allows individual station data of a terminal to be exchanged with another without the assistance of
MAT. The result of the exchange is printed out in the system message. The exchange of terminal data by this service
is called SWAP service. The following information is included in the system message:
a.) Successful activation:
b.) Unsuccessful activation:
Operating Procedure
To swap the station data of Station A (202) for Station B (209), operating from Station A
1.
Go off-hook; receive dial tone.
2.
Dial the Swap service access code; receive special dial tone. The LCD displays:
3.
Dial the Station Bus number (209); receive service set tone. The LCD displays:
4.
Replace the handset; the service will be activated.
When the service is restricted, the user hears reorder tone after dialing the target telephone number. The
LCD displays:
To confirm
5.
Dial 202 from Station A; Station B rings, and Station A receives ringback tone, or vice versa.
Service Conditions
1.
This service is available for the following telephone class:
TEC= 1:
2:
3:
4:
12:
2.
This service is available between the same type of terminals.
3.
The target station has to be idle in order to activate this service. In case the station is busy or lock out is
set, the service will be restricted.
4.
This service is available for the terminals that belong to the same Tenant or Module Group.
Page 364
Follow Phone
Follow Phone
Station data change notice.
Station data change notice and error code to indicate the restricted
condition.
SWAP
(Time Display)
SWAP OK
(Time Display)
Flashing
REST
(Time Display)
Analog telephone - DP (10P)
Analog telephone - PB
Analog telephone - DP/PB
Analog telephone - DP (20P)
term
Digital terminal (D
)
209
209
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
