Table of Contents
Advertisement
L-28
FCCS Programming
The following command assignments are required to use this feature via FCCS link.
When destination number is programmed by using TYPE = 1 (TELN) of ALDNN command
STEP 1:
ASYDL - System Data 1, Index 640, Bit 0-7. Assign FPC of a node which transmits Day/Night
changeover information.
System Data 1, Index 704-735. Assign FPC of a node which receives the Day/Night changeover
information transmitted from the node assigned by System Data 1, Index 640, Bit 0-7 above.
STEP 2:
ANPDN - Assign the first digit for Listed Directly Number (LDN) and forwarding destination.
TN:
1st DC:
CI:
NND:
BLF:
STEP 3:
ASPAN - Assign the number of digit of access code for LDN and forwarding destination.
TN:
ACC:
CI:
SRV:
NND:
STEP 4:
ALGSN - Assign Telephone Number to Night Mode destination number (Station Number).
TYPE = 1 (When LENS is used to specify the Telephone Number)
UGN:
TELN:
FPC:
LENS:
TYPE = 2 (When STN is used to specify the Telephone Number)
UGN:
LDN:
TN:
STN:
STEP 5:
ALDNN - Assign FPC of a node with attendant console which receives the LDN call by dialing
the LDN.
TN:
LDN:
FPC:
TYPE:
STN:
STEP 6:
ACFR - Allow the Call Forwarding Restriction Class.
TN:
TSFI:
CCI:
RES:
Page 456
LDN Night Connection
Tenant Number (1-255)
1st Digit Code (0-9,*,#)
Connection Status Index (N = Normal/H = Hooking/B = Busy)
Number of Necessary Digits (max. 6 digits)
Busy Lamp Field (0 = Out of Service/1 = In Service)
Tenant Number (1-255)
Access Code (max. 6 digits)
Connection Status Index (N = Normal/H = Hooking/B = Busy)
Kind of Service (Designate TELN = Telephone Number)
Necessary Digits (1-16)
User Group Number (Fixed to "1")
Telephone Number (max. 16 digits)
Fusion Point Code of the designated LENS
Line Equipment Numbers of physical station
User Group Number (Fixed to "1")
Listed Directory Number (max. 16 digits)
Tenant Number (1-255)
Station Number
Tenant Number (1-255)
Listed Directory Number (max. 16 digits)
Fusion Point Code of the node with attendant console which receives LDN calls
Number Type of Night Mode destination number of LDN. (Designate 1 = TELN.)
Station Number of Forwarding Destination (max. 16 digits) or specific attendant console
number assigned by ASAT command.
Tenant Number (1-255)
Transfer Service Feature Index (Assign 2 = Direct in Termination (Night only))
Call Category Index (Assign 1 = LDN (C.O. Line))
Restriction Data (Assign 1 = Allowed)
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
