Table of Contents
Advertisement
C-146
General Description
This feature allows a user to establish a conference connection by adding a third party who is held on a multiline of
term
a D
to the existing two-party connection. The held call which is to be added may be a station or trunk call.
Operating Procedure
term
To operate from a D
1.
Make a trunk/station call using line A on the D
2.
Place the in-progress call on hold.
3.
Place or answer a call using line B on the D
4.
Press the TRANSFER key.
5.
Enter an access code for Call Hold - Conference and line number of line A.
6.
Three-party conference is established.
To operate from other D
1.
Make a trunk/station call using line A on D
2.
Place the in-progress call on hold.
3.
Place or answer a call using line B on D
4.
Press the TRANSFER key on D
5.
Enter an access code for Call Hold - Conference and line number of line A.
6.
Three-party conference is established.
To operate from an analog station
1.
Make a trunk/station call using line A on the D
2.
Place the in-progress call on hold.
3.
Place or answer a call using an analog station.
4.
Press momentarily the SHF key of the analog station.
5.
Enter an access code for Call Hold - Conference and line number of line A.
6.
Three-party conference is established.
Service Conditions
1.
This service is available for the general user and the D
terminal user.)
2.
This service is available when the call is held by the D
3.
When the originally connected party (B) is placed on Exclusive Hold, this service is available only when
term
the D
user (A) engages in the call with the third party (C).
term
4.
When the D
[D-32D] cannot be activated.
5.
This service is not available when line (A) or (B) is an intercom line, hot line or CAS line. In these cases,
the service is restricted.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Call Hold - Conference
Call Hold - Conference
term
term
2.
user (A) places the station or trunk (B) on hold, including Exclusive Hold, DUAL HOLD
term
.
term
.
term
1.
term
2.
term
.
term
user. (not available for the ATT and ISDN
term
HOLD key.
C-146
Page 243
Advertisement
Table of Contents
