Table of Contents
Advertisement
C-26
C-26
General Description
This feature allows a target user (Station A) to call the station (Station B) which has set CALL FORWARDING -
ALL CALLS [C-5] to it. If the called station (Station B) has set the CALL FORWARDING - BUSY LINE [C-2] to
the calling station (Station A), the calling station (Station A) hears busy tone and can activate CALL BACK [C-1],
EXECUTIVE RIGHT-OF-WAY [E-1], or CALL WAITING - ORIGINATING [C-31].
Operating Procedure
Station A presses EXECUTIVE RIGHT-OF-WAY [E-1] or CALL WAITING [C-31] after hearing busy tone.
Service Conditions
1.
This service feature is allowed to all stations in the NEAX2400 IPX, except the ATTENDANT
CONSOLE [A-3].
2.
Any station that has set CALL FORWARDING - ALL CALLS [C-5] can activate any feature, if the
station is allowed the feature via CLASS OF SERVICE [C-15].
3.
When Station A (D
and calls Station B, each D
Station A
(4567)
Station B
(4501)
Programming
ASFC - Assign Service Feature Class that allows SFI = 156 (Call Forwarding - Override Indication) to
term
the D
stations allowed LCD indication of this service.
Page 200
Call Forwarding - Override
Call Forwarding - Override
term
) calls Station B (D
term
LCD displays as shown below:
TRANSFER
Transferring Station Transferred Station
TRANSFER
term
), or if Station A places an incoming call into hold condition
Transferred Station
4501
4501
Indicates Station B has been set Call
Forwarding - All Calls to Station A.
4501
4567
Indicates Station B has been set
Call Forwarding - All Calls to
Station A.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
