Table of Contents
Advertisement
D-69
General Description
This feature provides a DATA TRANSPARENCY path between nodes within the CCIS network for data
transmission using a Data Module or D
Operating Procedure
No manual operation is required.
Service Conditions
1.
Upon data call origination or termination using a Data Module equipped DTE, certain character string
sequences relating to status are exchanged over the CCIS network during call set up.
2.
After the data connection is established, the Data Module looks for a disconnect request from the DTE,
which consists of the ESC character followed immediately by RELEASE.
3.
An asynchronous transparency path up to 9600 bps is provided.
4.
A synchronous transparency path up to 48 Kbps is provided.
Programming
No programming is required.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Data Transparency - CCIS
Data Transparency - CCIS
term
/ Data Adapter.
D-69
Page 891
Advertisement
Table of Contents
