Table of Contents
Advertisement
M-11
Programming (cont'd)
STEP 2:
ARTD - Assign the Paging route as shown below:
RT: 1
1-OSGS
8-RLP
STEP 3:
ATRK - Assign the LENs, Paging Trunk Route Number, Trunk Number, and Tenant Number.
STEP 4:
MBTK - Assign the Make Idle status to the Paging trunks.
STEP 5:
ANPD - Reserve levels for trunk access and for PAGE answer and cancel codes. Assign the trunk
access level Connection Indexes, CI = N, H; Normal (N) and Hooking (H). Number of Necessary
Digits is usually 1 or 2. Busy Lamp Field is not activated. If the PAGE answer and cancel codes reside
in a level reserved for features, then assign according to a predetermined numbering plan. If the PAGE
answer and cancel codes reside in a separate level, then assign a Connection Index (CI) of Normal (N)
only. The Number of Necessary Digits is usually two, and the Busy Lamp Field is off.
STEP 6:
ASPA - For the Page trunk access code, assign the access code in the level as assigned in ANPD
above. Type of Service, SRV = OGC (Outgoing Call) for Outgoing trunks, Assign for Connection
Indexes (CI) of Normal (N) and Hooking (H). For the Page Route answer and cancel codes, assign the
access code in the level assigned in ANPD. Type of Service, SRV = PAGA (Paging Answer) and SRV
= PAGC (Multiple Announcement Service). Assign the proper route number that is associated with
this code. Assign a Connection Index of Normal (N).
STEP 7:
ARSC - Allow access to the paging route to the RSC of the Attendant Console in Route Restriction
Indexes (RRI) 2 & 3. To the RSC of the responding station, allow access to the incoming trunk in RRI
0 & 1.
STEP 8:
ASFC - Assign a Service Feature Class (SFC) that allows SFI 38, MEET-ME PAGE to the stations
that will answer a MEET-ME PAGE.
STEP 9:
ARRC - Allow trunk-to-trunk connection between the Paging route and the incoming/outgoing route.
Assign for ARI-A-RES, via the Attendant Console. The incoming/outgoing route would be the party
being held at a station or Attendant Console wishing to speak to the party for whom the MEET-ME
PAGE is intended.
Page 476
Meet-Me Paging - Attendant
:2
2-ONSG
:3
:2
15-LSG
:0/1
5-TF
:1
6-TCL
NEAX2400 IPX Feature Programming Manual
:8
7-L/T
:1
NDA-24297, Issue 1
Advertisement
Table of Contents
