Table of Contents
Advertisement
S-8
Programming
See STATION HUNTING-CIRCULAR
two types of station hunting use secretaries.
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
STEP 1:
ASYDN - These data must be assigned to the NCN.
System Data 1, Index 69, b5:
Hunting Group when transferred party is busy (Station Hunting after Call Forwarding - Busy Line):
0 = Hunt in Transferring Party's Group
1 = Hunt in Transferred Party's Group
STEP 2:
ASHPN - These data must be assigned to the NCN.
Assign the Hunt Group using Telephone Number.
UGN:
1st TELN:
TELN:
SECRETARY TELN:Telephone Number of Secretary Station
Note:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
Page 660
Station Hunting - Secretarial
Note
User Group Number
Telephone Number of the pilot station
Telephone Number in Hunting Group
[S-7]
and STATION HUNTING-TERMINAL [S-9]. These
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
