Table of Contents
Advertisement
R-51
General Description
This feature allows a user to assign a desired trunk type for a route by the system data. The assigned trunk type
(maximum of 4 or 8 digits) is displayed on the upper line of D
•
4-digit display
•
8-digit display
Trunk type, which can be changed by system data.
Note:
Operating Procedure
No manual operation is required.
Service Conditions
1.
Trunk types are assigned a maximum of 4 or 8 digits (depending on system data) using ASCII characters.
2.
The trunk type assigned by this feature is not displayed when a call terminates from the ISDN trunk or
when a station is connected to the call from/to the ISDN trunk.
3.
The trunk type assigned by this feature is displayed only when a call terminates to a station or when a
station is connected to the call. In case of the call through a CCIS line, the assigned trunk type is not
displayed. If a station is connected to the trunk user through the CCIS, ROM data corresponding to the
Trunk Class of the route is displayed. If a station is connected to a station belonging to a different office
within the CCIS network, the telephone number of the opposite station is displayed.
4.
The trunk type assigned by this feature cannot be displayed at the I-terminal and PCS.
5.
This feature is not applicable to the Attendant Console.
6.
The current Caller ID services and Calling Party Number - Name Assignment and Display [C-157] service
have priority over this feature.
7.
When a call terminates from the trunk which has been assigned the C.O. line number, the LCD display is
as shown below:
•
4-digit display
ABCD: trunk type assigned by
this feature.
123:
trunk number
preassigned.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Route Name Display
Route Name Display
term
DDD
AT&T
NEWYORK
LCD.
TK No.
1
Note
1
Note
Note
ABCD 123
R-51
Page 635
Advertisement
Table of Contents
