Table of Contents
Advertisement
Service Conditions (cont'd)
FCCS Network Group
1.
Since multiple FCCS networks are connected in the network, an FCCS network group number is required
to distinguish each FCCS network from others. An FCCS network group is called an FCCS group, and a
maximum of four FCCS groups can be connected in the network.
2.
A center FCCS group should be specified from among multiple FCCS groups in the network. It is the only
node allowed to assign and delete telephone numbers within the self FCCS group and the others.
3.
The network consists of FCCS groups and NEAX2000 IVS
the center FCCS group, and within the range of 4 SPANs from end to end.
Interactions
1.
PS Roaming and Hand-over services cannot be activated in the network. To execute Roaming service, the
Q.931a line should be connected exclusively.
2.
The OAI/ACD service in the network is executed with the same conditions in the normal CCIS network.
Page 798
Networking with NEAX2400 IPX and NEAX2000 IVS
2
2
systems within the range of 2 SPANs from
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
