Rockwell Automation MagneMotion QuickStick HT User Manual page 331

Table of Contents

Advertisement

OSSD:
Path:
PC-Based Controller: The user-supplied general-purpose computer that provides control and
PE:
Platooning:
PLC:
Position:
Power Supply:
Programmable Logic Controller: The user-supplied dedicated controller consisting of Processor
Propulsion Power: The power that is used for vehicle motion. See also,
Protected Area:
Puck:
QS:
QuickStick:
QuickStick HT User Manual
Accreditation bodies evaluate ATL organizations to ISO/IEC 17025 for testing
and calibration laboratories.
Output Signal Switching Device. The interface of a sensor (such as a light cur-
tain) designed for reliably signaling a safety-related event. OSSD signals are
outputs from the protective device to a safety relay.
A designation for one or more motors placed end to end, which defines a linear
route for vehicle travel. A path begins at the
the series and ends at the
paths must begin at a
tion for determining positions along that path.
sequencing for the operation of the transport system.
Protective Earth. A conductor that is provided for safety purposes (for exam-
ple, against the risk of electric shock) and which also provides a conductive
path to earth. See also, Ground.
A set of vehicles that are moving in a convoy and being controlled together.
This group of vehicles is allowed to maintain a distance between each other
while in motion that is less than the
See
Programmable Logic
A specific location on a Path, which is measured from the beginning of that
path, which is used as a vehicle destination. Position zero on any path is
defined as the leading edge of the first LSM in the path.
A vehicle at a specific position has its midpoint over that location on the path.
The equipment that is used to convert facility AC power to the correct voltages
for the transport system.
and I/O modules that provide control, sequencing, and safety interlock logic
for the operation of the transport system.
The area around a node that is defined by the entry gates and clearance dis-
tances. This area is used to make sure that vehicles do not collide with other
vehicles in the node or with the mechanism that is related to the node.
A preconfigured vehicle for use on MagneMover LITE transport systems. The
magnet array is mounted to the puck and interacts with the motors, which
move each vehicle independently. See
Vehicle.
See QuickStick.
A MagneMotion linear synchronous motor that enables quick, efficient con-
veyance of large loads on user-designed guideways and vehicles. QuickStick
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Downstream
end of the last motor in the series. All
Node
and the beginning of a path is always the zero posi-
Brick-wall
Controller.
Glide Puck
Upstream
end of the first motor in
Headway.
Logic
Power.
and
Wheeled
Puck. See also,
QuickStick
331

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MagneMotion QuickStick HT and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents