Rockwell Automation MagneMotion QuickStick HT User Manual page 329

HLC Control Group: The portion of a multi-HLC LSM transport system under control of a specific
Host Application:
Host Control Session: A session between a host controller application (such as the NCHost TCP
Host Controller:
Host Status Session: A session between a host controller application (such as the NCHost TCP
ICT:
ID:
Independent Cart Technology: A programmable intelligent conveyor system that uses linear syn-
Interlock:
Inverter:
Keep-out Area:
Logic Power:
LSB:
LSM:
MagneMover LITE: A MagneMotion linear synchronous motor with integrated guideways and
MagneMover LITE System: A group of specific components that contribute to a
QuickStick HT User Manual
HLC.
The software on the host controller that provides monitoring and control of the
transport system.
Interface Utility) and an HLC that allows control of all aspects of transport sys-
tem operation. The Host Control Session also allows active monitoring of
transport system status.
The user-supplied controller for the operation of the transport system. The con-
troller can be either a
ler.
Interface Utility) and an HLC that only provides active monitoring of transport
system status.
See Independent Cart
The software labels used to identify various components of the transport sys-
tem to make sure proper execution of commands involving vehicle position,
vehicle destination, and transport system configuration. ID types include vehi-
cle and path.
chronous motors for moving multiple independently controlled vehicles.
A user-supplied circuit that is used to stop motion in the transport system. It is
wired through the digital I/O on the NC-12
The hardware that converts DC from the propulsion power bus to pulse-width
modulated AC to energize the coils in a
and the Inverter for QuickStick HT motors. See Drive.
A unidirectional area of a Path. A vehicle that is moving in the specified direc-
tion of the area is not allowed to enter the area unless it has permission from
the motors to either move past or stop within the area. Once a vehicle enters the
keep-out area in the specified direction, all other vehicles that are moving in
the same direction must wait to enter the area until that vehicle exits.
The power that is used for the controllers and signals. See also,
Power.
Least Significant Byte.
Linear Synchronous Motor. See
vehicles that enable quick, efficient conveyance of small loads.
These components include
Pucks, and other parts available from MagneMotion.
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
PC-Based Controller
Technology.
Motor Block
MagneMover LITE
MagneMover LITE
MagneMover LITE System
or a Programmable Logic Control-
Node Controller.
and contains the
Propulsion
and QuickStick.
Transport
motors, Node Controllers,
Master
System.
329