Install The New Motor - Rockwell Automation MagneMotion QuickStick HT User Manual

Install the New Motor

1. See Mounting the Motors on page 181
2. Reconnect the power and sense connections to the motor (refer to the labels previously
placed on the cables).
3. Restore power to the section of the QSHT transport system where the motor was
replaced.
4. Program the masters and slaves on the new motor with the current Motor ERF Image
files (see
5. Resume motion on the section of the QSHT transport system where the motor was
replaced.
QuickStick HT User Manual
Programming Motors on page
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
for detailed installation instructions.
306).
Maintenance
Repair
303