Troubleshooting; Initial Troubleshooting - Rockwell Automation MagneMotion QuickStick HT User Manual

Maintenance

Troubleshooting

Troubleshooting
This section describes the common difficulties that are encountered with the QuickStick HT
transport system and software components.
For assistance, see

Initial Troubleshooting

This section covers the initial determination of the problem area within the QuickStick HT
transport system and provides direction to the second step of the troubleshooting process. If a
specific problem is suspected, see that problem in
tified, review each of the symptoms that are identified in
lem area.
Power lights do not turn on.
Motors report power-related faults.
Vehicles do not seem to move as fast as when
the QSHT transport system was initially
installed.
Node controller logs do not indicate the correct
time.
The QSHT transport system does not respond
to the host controller.
Vehicles are producing excessive noise.
The light stack does not function as expected.
Changes to motor status returned by PLC.
286
Contact ICT Customer Support on page
Table 8-2: Initial Troubleshooting
Symptom
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
300.
Table 8-2. If the problem has not been iden-
Table 8-2 to help determine the prob-
Possible Problem Area
See Power-Related Troubleshooting on page 287
See Power-Related Troubleshooting on page 287
See Motion Control Troubleshooting on page 294
See Node Controller Troubleshooting on page 292
See Communication Troubleshooting on page 293
See Motion Control Troubleshooting on page 294
See Motion Control Troubleshooting on page 294
See Light Stack Troubleshooting on page 295
See QSHT 5700 Inverter Fault Troubleshooting on
page 296
MagneMotion