Repair; Quickstick Ht Transport System Repair Procedures - Rockwell Automation MagneMotion QuickStick HT User Manual

Repair

If a component of the QuickStick HT transport system malfunctions, see
page 286 in this manual for diagnostic procedures. If these procedures are not adequate to
determine the source of the problem, see
the failed unit has been identified, a replacement unit can be ordered and installed as directed
in Installation on page
NOTE: The components of the QuickStick HT transport system are designed for easy
replacement. Motors, drives, and other modules do not contain any user serviceable
parts.
NOTICE
Component
QSHT Transport System
QSMC
QuickStick HT User Manual
175.
Only a qualified service representative can service the com-
ponents of the QuickStick HT transport system. Any attempt
to open the transport system modules by anyone other than a
qualified MagneMotion service representative voids the war-
ranty.
Table 8-9: QuickStick HT Transport System Repair Procedures
Replacing Motors
Replacing Motor Drives
Programming Motors
Separating Magnet Arrays
Cleaning or Replacing the Motor Controller Fan
Filter
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Contact ICT Customer Support on page
Maintenance Action
Maintenance
Repair
Troubleshooting on
300. Once
Page #
302
304
306
307
308
301