1/2 Meter Motor - Rockwell Automation MagneMotion QuickStick HT User Manual

1/2 Meter Motor

700-1483-01
UPSTREAM
8X M6X1.0 - 6H
MAX ALLOWABLE TORQUE = 4.8 Nm (42 IN-LBS)
GND HOLE
M6X1.0 - 6H 8.0
Weight: 19.5 kg [43.0 lb]
NOTE: QuickStick HT motors have an external motor drive (see
The exclusion zones that are shown are for the QSHT motor only. Additional exclu-
sion zones may be required based on the design of the vehicle and the material being
transported.
Ingress Protection Rating: IP67 (IP68 optional).
See Motors (Stators) on page 133
Contact ICT Customer Support for current detail drawings.
Exposed Materials
• 302, 304 Stainless Steel.
• 300 Series Corrosion Resistant Steel.
• Aluminum alloy with chromate over cadmium plating.
• Nickel plated brass.
• Nitrile.
• Neoprene.
QuickStick HT User Manual
488 ±0.5
[19.2 ±0.02]
FORWARD DIRECTION OF TRAVEL
8
5.05±0.05 6.0
(FOR CUSTOMER PROVIDED
ALIGNMENT PIN)
DRIVE CONNECTOR
C L
CABLE DIRECTION
Figure 4-2: 1/2 Meter Motor Mechanical Drawing
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Specifications and Site Requirements
73.0 ±0.7
[2.87 ±0.03]
DOWNSTREAM
78
[3.1]
2X CLEARANCE FOR DRIVE & SENSE
RIGHT ANGLE CABLE CONNECTOR
SENSE CONNECTOR
35.3
[1.39]
35.00
[1.378]
31.5
[1.24]
CABLE DIRECTION
C L
0
35.00
[1.378]
ALIGNMENT SLOT
All Dimensions in Millimeters [Inches]
for the electrical specifications.
Mechanical Specifications
104 ±1
[4.1 ±0.04]
42
[1.7]
(SENSE CONN)
(DRIVE CONN)
Figure 4-5 and Figure 4-7).
91
[3.6]
125