Rockwell Automation MagneMotion QuickStick HT User Manual page 167

Menu/Submenu
MOTOR DIAGNOSTICS
SAFETY INPUTS
SAFETY DIAGNOSTICS
DIGITAL INPUTS
Navigating the Display
The menu screens provide information about the inverter, the motors connected to it, and
diagnostics. Use the soft menu items and navigation buttons below the display to view the
information by pressing one of the buttons to access the menus and displays. Parameters can-
not be updated in the menu screens.
QuickStick HT User Manual
Table 4-50: LCD Pages (Continued)
MOTOR TEMP – Temperature of motor supplied by currently
selected inverter (0.0 - 80.0 C).
OUT CURR – Out current as commanded by currently selected
inverter (0.0 - 20.0 A).
1 – State of safety input 1 (ON, OFF).
2 – State of safety input 2 (ON, OFF).
SAFETY STATE – Safety state (INIT, SYNC, OPERATIONAL,
RESET, FAULT).
INPUT CONNECTIONS – Network safety inputs (N/A).
OUTPUT CONNECTIONS – Network safety outputs (N/A).
IN1 – Digital Input 1 state (ON, OFF).
IN2 – Digital Input 2 state (ON, OFF).
IN3 – Digital Input 3 state (ON, OFF).
IN4 – Digital Input 4 state (ON, OFF).
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Specifications and Site Requirements
Electrical Specifications
Information
167