Packing Procedure - Rockwell Automation MagneMotion QuickStick HT User Manual

Packing Procedure

When any of the QuickStick HT components are shipped, either for return to MagneMotion
for service or to another location, they must be properly packaged to make sure that they
arrive undamaged. The following procedure provides the correct method of handling and
packaging the QuickStick HT components for shipment.
NOTE: The original shipping packaging must be used when shipping QuickStick HT com-
ponents. If the original packaging has become lost or damaged, contact MagneMo-
tion for replacements.
NOTICE
QuickStick HT User Manual
MAGNETIC FIELD HAZARD: Strong magnets in use.
To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
arrays.
CRUSH HAZARD: Strong magnets in use.
To avoid severe injury from strong magnetic attractive
forces:
• Handle only one vehicle or magnet array at a time.
• Do not place any body parts (for example, fingers)
between a magnet array and any QuickStick HT motors,
ferrous material, or another magnet array.
• Magnet arrays or vehicles not being used must be secured
individually in isolated packaging.
Strong magnets in use.
To avoid damage to watches, instruments, electronics, and
magnetic media, keep metal tools, metal objects, magnetic
media (for example, memory disks/chips, credit cards, and
tapes) and electronics away from the magnet arrays.
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Maintenance
Shipping
311