Ordering Information For Accessories - Siemens SINAMICS Series Operating Instructions Manual

Type spectrum, ordering information
2.4 Ordering information for options and accessories
Option
Nickel-plated copper bars
(for devices with aluminum bars as standard, use of nickel-plated copper bars)
Control for switching over the power unit topology for devices connected in parallel and series
This option is described in the application document "12-pulse applications".

Ordering information for accessories

Table 2- 5 Articles numbers for accessories
Article
Standard CUD retrofit kit
Combination of the spare parts, Standard CUD and connector board
Standard CUD coated retrofit kit
Combination of the spare parts, Standard CUD coated and connector board coated
Advanced CUD retrofit kit
Combination of the spare parts, Advanced CUD and connector board
Advanced CUD coated retrofit kit
Combination of the spare parts, Advanced CUD coated and connector board coated
CBE20 PROFINET
Memory card (equivalent to spare part for options S01 and S02)
Terminal Module TM15
Terminal Module TM31
Terminal Module TM150
Sensor Module Cabinet-Mounted SMC10
Sensor Module Cabinet-Mounted SMC30
Mounting kit to increase the degree of protection to IP20 for 15 A to 30 A devices
Mounting kit to increase the degree of protection to IP20 for 60 A to 280 A devices
Mounting kit to increase the degree of protection to IP20 for 400 A to 600 A devices
Mounting kit to increase the degree of protection to IP20 for 720 A to 850 A devices
SICROWBAR overvoltage protection
Firing Unit Trigger-Board
Fuses
Reactors
RFI suppression filter
STARTER commissioning tool
Drive Control Chart (DCC) for SINAMICS
Drive Control Chart (DCC) for SINAMICS and SIMOTION
Please contact your local Siemens office.
1)
See Chapter "RFI suppression filter (Page 103)"
2)
See Chapter "Fuses (Page 149)" as well as the catalogs and reference sources specified in this chapter
3)
See Chapter "Line reactors (Page 146)"
4)
32
Order codes
M10
S50
Article number
6RY1803-0AA00-0AA1 +
6RY1803-0GA00
6RY1803-0AA20-0AA1 +
6RY1803-0GA20
6RY1803-0AA05-0AA1 +
6RY1803-0GA00
6RY1803-0AA25-0AA1 +
6RY1803-0GA20
6SL3055-0AA00-2EB0
6RX1800-0AS01
6SL3055-0AA00-3FA0
6SL3055-0AA00-3AA1
6SL3055-0AA00-3LA0
6SL3055-0AA00-5AA3
6SL3055-0AA00-5CA2
6RX1800-0MA00
6RX1800-0MA01
6RX1800-0MA02
6RX1800-0MA03
Depending on device type
6RY1803-0CP00
Depending on device type
Depending on device type
Depending on device type
6SL3072-0AA00-0AG0
6AU1810-1HA20-1XA0
6AU1810-1JA20-1XA0
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
1)
3)
4)
2)