Siemens SINAMICS Series Operating Instructions Manual page 649

Configuring the startup trace
1. In STARTER, click the
The "Trace" parameterizing screen form is then displayed.
Figure 10-97 Startup trace in STARTER
2. Activate the "Save recording in the device" checkbox.
3. Enter a number ≥ 1 in the "Number of recordings" field.
Note
Detailed information on how to parameterize and operate the trace function is available in
the STARTER online help in Chapter "Trace, measuring functions and automatic
controller setting".
4. Make the required trace settings and save the settings.
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
symbol (device trace-function generator).
Descriptions of functions
10.34 Diagnostics
647