Terminal Module Tm15; Safety Instructions - Siemens SINAMICS Series Operating Instructions Manual

Hide thumbs Also See for SINAMICS Series:

Table of Contents

Additional system components

7.4 Terminal Module TM15

Terminal Module TM15

The TM15 is a terminal expansion module for snapping onto a mounting rail according to

EN 60715. The number of available digital inputs and outputs within a drive system can be

expanded with the TM15.

DRIVE-CLiQ interfaces

Bidirectional digital inputs/outputs

Non-observance of the safety instructions

If the safety instructions in Chapter 1 are not observed, accidents can occur involving

severe injuries or death.

• Make sure that the safety instructions are observed.

Fire through overheating due to insufficient ventilation clearances

Inadequate ventilation clearances cause overheating with a risk for personnel due to smoke

and fire. This can also result in more downtimes and reduced service lives of the Terminal

• For this reason, it is imperative that you maintain the 50 mm clearances above and

Damage through the use of incorrect DRIVE-CLiQ cables

Damage or malfunctions can occur on the devices or system when incorrect or unreleased

DRIVE-CLiQ cables are used.

• Only use suitable DRIVE-CLiQ cables that have been released by Siemens for the

Interface overview of the TM15

below the Terminal Module.

respective application.

24 (electrical isolation in three groups each with eight DI/DO)

Operating Instructions, 12/2018, A5E34763375A

SINAMICS DCM DC Converter