Siemens SINAMICS Series Operating Instructions Manual page 682

Descriptions of functions
10.38 Write and know-how protection
4. Call the "Load to file system" function.
The "Load to File System" dialog box opens.
Figure 10-107 Load to file system (default setting)
Specifying the general memory data
The "General" tab is displayed automatically when the dialog is called. The "Save normally"
option is activated by default.
1. If you want to save the data in compressed form, click the "Save compressed
(.zip archive)" option button.
The "Store additional data on the target device" option is deactivated in the default
setting.
2. If you want to store additional data, such as program sources, on the target device,
activate this option.
Optionally you can also activate "Including DCC chart data". Graphical chart data can
then also be stored.
3. Then enter the path for the storage directory in the appropriate input field, or click
"Browse" and select the directory in your file system.
680
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A