Sensor Module Cabinet-Mounted Smc30 - Siemens SINAMICS Series Operating Instructions Manual

Additional system components

7.3 Sensor Module Cabinet-Mounted SMC30

7.3 Sensor Module Cabinet-Mounted SMC30
Supported types
The SINAMICS DC MASTER only supports the Sensor Module Cabinet-Mounted SMC30
with article number 6SL3055-0AA00-5CA2. Other types may not be used. You can easily
identify whether the version is supported by the width of the module:
Table 7- 12
SMC30 article number
6SL3055-0AA00-5CA2
6SL3055-0AA00-5CA0
6SL3055-0AA00-5CA1
Number of SMC30s connected
The SINAMICS DC MASTER supports the connection of one Sensor Module Cabinet-
Mounted SMC30.
7.3.1 Description
The Sensor Module Cabinet-Mounted SMC30 evaluates encoder signals and transmits the
speed, actual position value, and, if necessary, the motor temperature and reference point
via DRIVE-CLiQ to the Control Unit.
The SMC30 is used to evaluate encoder signals from encoders with TTL, HTL, or SSI
interfaces.
A combination of a TTL/HTL signal and SSI absolute signal is possible at terminals
X521/X531 if both signals are derived from the same measured variable.
206
SMC30 types
Width
30 mm
50 mm
50 mm
Use with SINAMICS DC MASTER
Possible
Not possible
Not possible
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A