Siemens SINAMICS Series Operating Instructions Manual page 33

Table 2- 2 Options field
Option
2Q field power unit (not possible for 15 A and 30 A devices)
No field power unit (not possible for 15 A and 30 A devices)
Field power unit with 85 A rated current
(possible for devices with rated armature DC current ≥1500 A, in standard version and with
option L11)
Table 2- 3 Fan options
Option
Device without fan
(possible for devices with a rated armature DC current ≥1500 A)
Note:
The air flow specified in the technical data must be maintained (fan air flow in m
Fan for 1-phase connection
(possible for devices with rated armature DC current 400 A to 1200 A)
Table 2- 4 Additional options
Option
Terminal Module Cabinet (TMC)
Can be snapped onto a 35 mm mounting rail.
Enables the simple connection of the CUD standard signals (X177) via spring-loaded
terminals in an easily accessible area of the control cabinet.
The CUD is equipped with an adapter board. Terminal Module Cabinet and connecting cable
(3 m) are supplied separately.
Notes:
In the device version with option G63, the X177 terminal connections are no longer
•
available directly on the CUD.
When ordering, please specify which CUD (in the left or right slot) is to be equipped with
•
the option.
If two CUDs are to be equipped with option G63, the option must be ordered for each
•
CUD.
Armature infeed with extra-low voltage 10 V to 50 V
(possible for devices with rated supply voltage ≤ 575 V
Electronic power supply for connection to 24 V DC
Sensor for the air intake temperature
Possible as of firmware version 1.3 HF1
Coated modules
Coated modules increase the degree of ruggedness with respect to climatic effects:
Relative / absolute humidity 5% to 95% / 1 to 29 g/m
medium temperature ≤ 30 °C
≤ 60% with the occurrence of SO
medium temperature 30 °C to 40 °C
Oil mist, salt mist, formation of ice, condensation, dropping, spray, splashing and jet-water not
permissible.
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
for ambient temperature or cooling
3
and H S and/or for ambient temperature or cooling
2 2
Type spectrum, ordering information
2.4 Ordering information for options and accessories
/h).
3
Order codes
L11
L10
L85
Order codes
L20
L21
Order codes
G63
L04
L05
L15
M08
31