Siemens SINAMICS Series Operating Instructions Manual page 6

Preface
Note
Hardware/firmware compatibility
The hardware version of the Control Unit (CUD) must be taken into account when updating
the device firmware, see the following table.
The hardware version can be read from the label on the right-hand side of the CUD.
CUD (print on label)
C98043-A7100-L1-...
C98043-A7100-L2-...
C98043-A7100-L100-...
C98043-A7100-L200-...
C98043-A7100-L3-...
C98043-A7100-L4-...
C98043-A7100-L103-...
C98043-A7100-L204-...
A5E...
SINAMICS DCM documentation available
SINAMICS DCM DC Converters Operating Instructions
Contains all information on
ordering, installation, connecting, commissioning, maintaining, description of functions,
and service
SINAMICS DCM Control Modules Operating Instructions
Contains all information on
ordering, installation, connecting, commissioning, maintaining, description of functions,
and service
SINAMICS DCM List Manual (for DC converters and control modules)
Contains
parameter list, function diagrams, list of faults and alarms
SINAMICS free function blocks, function description
Includes a general description, list of parameters, the function block diagrams as well as
the list of faults and alarms.
Manuals and application notes on the Internet
The manuals and application documents are also available in the Internet:
Manuals (https://support.industry.siemens.com/cs/ww/en/ps/13298/man)
The list of general conditions available there include current supplements to the manuals.
The notes included in the general condition lists have a higher priority than the statements
made in the manuals.
4
Executable firmware versions
1.1, 1.2, 1.3
All versions
All versions
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A