Device Commissioning; Aop Settings - Siemens SINAMICS Series Operating Instructions Manual

9.3.5.2

Device commissioning

In this menu, you can enter the device commissioning status directly. This is the only way to
reset parameters to the factory setting, for example.
9.3.5.3

AOP settings

Control settings
This defines the settings for the control keys in LOCAL mode (see the section titled
"Operation/Operation via the operator panel") as well as additional settings that are relevant
for drive control.
Display settings
In this menu, you set the lighting, brightness, and contrast for the display.
Define operation screen
In this menu, you can switch between five operation screens. You can set the parameters to
be displayed.
Figure 9-20 Define operation screen
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
9.3 Controlling via the AOP30 operator panel
Operation
387