Transportation, Unpacking; Installation - Siemens SINAMICS Series Operating Instructions Manual

Transportation, unpacking, installation
5.1

Transportation, unpacking

The SINAMICS DC MASTER is packaged at the manufacturer's site in accordance with the
order specification. A product packaging label is located on the carton.
Avoid heavy vibration and severe shocks during transportation, e.g. when when lowering into
position.
Follow the instructions on the packaging concerning transportation, storage and proper
handling.
The SINAMICS DC MASTER can be installed once it has been unpacked, and you have
checked that the delivery is complete and the unit is intact.
The packaging materials consist of the carton and corrugated cardboard. And can be
disposed of in accordance with local regulations for cardboard packaging.
If you discover any damage that has occurred in transit, please inform your shipping agent
immediately.
5.2

Installation

Failure to observe general safety instructions and residual risks
If the general safety instructions and remaining risks are not observed, accidents can occur
involving severe injuries or death.
• Observe the general safety instructions.
• When assessing the risk, take into account remaining risks.
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
WARNING
5
77