X500 Drive-Cliq Interface; X524 Electronics Power Supply - Siemens SINAMICS Series Operating Instructions Manual

7.2.2.2

X500 DRIVE-CLiQ interface

Table 7- 6
Connector
Connector type: DRIVE-CLiQ socket
The blanking cover for the DRIVE-CLiQ port is included in the scope of delivery.
Blanking covers (50 x) Article No: 6SL3066-4CA00-0AA0
7.2.2.3

X524 Electronics power supply

Table 7- 7
Connector
Type: Screw terminal
Conductor cross sections that can be connected: Flexible, 0.08 mm
Stripped length: 8 to 9 mm
Tool: 0.4 × 2.0 mm screwdriver
The maximum cable length that can be connected is 30 m.
Note
The two "+" or "M" terminals are jumpered in the connector. This ensures that the supply
voltage is looped through.
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
X500: DRIVE-CLiQ interface
Pin Signal name
1 TXP
2 TXN
3 RXP
4 Reserved, do not use
5 Reserved, do not use
6 RXN
7 Reserved, do not use
8 Reserved, do not use
A Reserved, do not use
B M (0 V)
X524: Electronics power supply
Terminal Function
+ Electronics power supply
+ Electronics power supply
M Electronics ground
M Electronics ground
Additional system components
7.2 SMC10 Sensor Module Cabinet-Mounted
Technical data
Transmit data +
Transmit data -
Receive data +
Receive data -
Electronics ground
Technical data
Voltage: 24 V (20.4 ... 28.8 V)
Current consumption: max. 0.35 A
Max. current via jumper in connector: 20 A
(15 A according to UL/CSA)
to 2.5 mm
2 2
199