Siemens SINAMICS Series Operating Instructions Manual page 212

Additional system components
7.3 Sensor Module Cabinet-Mounted SMC30
7.3.3.2 X500 DRIVE-CLiQ interface
Table 7- 13
Connector
Connector type: DRIVE-CLiQ socket
The blanking cover for the DRIVE-CLiQ port is included in the scope of supply.
Blanking covers (50 x) Article No.: 6SL3066-4CA00-0AA0
7.3.3.3 X524 electronic power supply
Table 7- 14
Connector
Type: Screw terminal
Conductor cross sections that can be connected: Flexible, 0.08 mm
Stripped length: 8 to 9 mm
Tool: 0.4 × 2.0 mm screwdriver
The maximum cable length that can be connected is 30 m.
Note
The two "+" or "M" terminals are jumpered in the connector. This ensures that the supply
voltage is looped through.
210
DRIVE-CLiQ interface X500
Pin Signal name
1 TXP
2 TXN
3 RXP
4 Reserved, do not use
5 Reserved, do not use
6 RXN
7 Reserved, do not use
8 Reserved, do not use
A Reserved, do not use
B M (0 V)
X524 terminal strip
Terminal Function
+ Electronic power supply
+ Electronic power supply
M Electronics ground
M Electronics ground
Technical specifications
Transmit data +
Transmit data -
Receive data +
Receive data -
Electronics ground
Technical specifications
Voltage: 24 V (20.4 – 28.8 V)
Power consumption: Max. 0.55 A
Max. current via the jumper in the
connector: 20 A (15 A according to UL/CSA)
to 2.5 mm
2 2
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A