Run The Oracle Configuration Wizard - Oracle Fabric Interconnect Series User Manual

Run the Oracle Configuration Wizard

DNS server names or IP addresses (required only if assigning a static address)
■
NTP server names or IP address(es)
■
You will also find it helpful to determine:
whether you want the Fabric Interconnect or a third-party subnet manager to manage the
■
InfiniBand subnet. By default, the wizard sets this to "true" so that the Fabric Interconnect
assumes the role of IB subnet manager. The following prompt in the Oracle Configuration
Wizard controls whether the Fabric Interconnect is the InfiniBand Subnet Manager:
Is this Interconnect to be designated as the IB subnet manager? [Y/n]
whether you want the Fabric Interconnect to periodically transmit encrypted diagnostic
■
information to Oracle Technical Assistance for proactive system monitoring. By default,
the wizard sets this to "true" so that diagnostic information is sent to Oracle Technical
Assistance. In the Oracle First Boot script, the diagnostic information is controlled through
a software feature called Oracle Phone Home The following prompt in the Oracle First Boot
script controls the Oracle Phone Home diagnostic information:
Do you want this Interconnect to send diagnostic data to Oracle periodically? [Y/n]
If enabled (Y), the following phone home defaults are used for transmission of diagnostic
data:
■
■
■
■
Run the Oracle Configuration Wizard
1. If the Fabric Interconnect is not currently running, press and hold the Power
switch for 5 seconds. See
page
96 Oracle Fabric Interconnect Hardware User's Guide • July 2016
periodic transmission
weekly transmission at midnight.every Sunday
port 3128
IP address and private information is stripped.
97.
Figure 59, "Fabric Interconnect Power Switch," on