Install A Fabric Interconnect F1-15 Management Module - Oracle Fabric Interconnect Series User Manual

Install a Fabric Interconnect F1-15 Management Module

4. Grasp the handle (2) and withdraw the module from the chassis.
FIGURE 95
Install a Fabric Interconnect F1-15 Management
Module
Note -
facing towards the right edge of the chassis. Also, make sure that the module's top and bottom
edges are correctly aligned with the upper and lower tracks at the left edge of the Management
module's slot, which is labelled M.
Slide the module into the slot until you feel the connectors begin to seat.
1.
Carefully, but firmly, press the Management module into the slot until the
2.
module's faceplate is flush with those of the other I/O modules.
3. Tighten the screw.
148 Oracle Fabric Interconnect Hardware User's Guide • July 2016
Removing the Fabric Interconnect F1-15 Management Module
When re-installing the Management module, ensure that the module's component side is