Table of Contents
Advertisement
Understanding Chassis Components and Indicators
8.
Install the I/O modules as documented in
Module" on page
Cable the Fabric Interconnect F1-4 as documented in
9.
Interconnect to Other Equipment" on page
10.
When the Fabric Interconnect F1-4 is installed in the rack and cabled to the other
equipment, you will plug in the power cords and anchor the power cables in
place as documented in
Understanding Chassis Components and Indicators
Refer to the following illustrations for the locations of the chassis components, controls, and
indicators for the Fabric Interconnect F1-15 and Fabric Interconnect F1‐4.
Fabric Interconnect Chassis Components
The Fabric Interconnect comes in different models and connectivity types:
a Fabric Interconnect F1-15 with different speeds of InfiniBand connectivity (DDR or
■
QDR).
a Fabric Interconnect F1-4 with different speeds of InfiniBand connectivity (DDR or QDR).
■
Fabric Interconnect speed and connectivity for servers is determined by the type of
Fabric Board installed in the system. For more information, see
Servers" on page
Also, different I/O Modules will be connected to network, storage, and other resources
depending on the type of module, for more information, see
and Other Equipment" on page
Fabric Interconnects
Figure 30, "Fabric Interconnect F1-15 Front and Rear Panel Components," on page 59
shows the Fabric Interconnect F1-15's chassis components on the front and rear panels. The
following illustration shows a Fabric Interconnect F1-15 supporting DDR connectivity.
58
Oracle Fabric Interconnect Hardware User's Guide • July 2016
69.
"AC Power" on page
77.
80.
"Installing an I/O
"Connecting the Fabric
77.
89.
"Connecting to Client
"Connecting to Switches, Routers
Advertisement
Table of Contents
