Remove Fabric Interconnect F1-4 Fan Modules; Insert A Fabric Interconnect F1-4 Fan Module - Oracle Fabric Interconnect Series User Manual

Installation is the reverse of this procedure.

Remove Fabric Interconnect F1-4 Fan Modules

Fabric Interconnect F1-4 fan modules are located on the front of the chassis.
To remove a Fabric Interconnect F1-4 fan module, follow this procedure:
1. Use a Phillips screwdriver to release the two spring-loaded securing screws
located at the top corners of the each fan module (1). See
a Fabric Interconnect F1-4 Fan Module," on page
FIGURE 63 Removing a Fabric Interconnect F1-4 Fan Module
2. Grasp the handle and slide the fan module out of the chassis (2).

Insert a Fabric Interconnect F1-4 Fan Module

1. Orient the fan module so that the sheet metal side is facing down and the handle
is facing you, and align the fan module with the empty fan module bay in the
chassis.
Remove Fabric Interconnect F1-4 Fan Modules
Figure 63, "Removing
105.
Performing Service Tasks 105