Unpack the Fabric Interconnect F1-4
The Fabric Interconnect F1-4 is a 2 rack-unit Fabric Interconnect with capacity for 4 I/O
modules and either 24 InfiniBand server connections at DDR speeds, or 20 InfiniBand server
connections at QDR speeds.
The Fabric Interconnect chassis weighs 45 - 53 pounds (20 - 24 kilograms)
Caution -
depending on its configuration. Removing the chassis from the shipping container and installing
it in an equipment rack requires a minimum of two people. Attempting to unpack and install
this system alone could result in equipment damage or personal injury.
To unpack the system, you will need the following tools:
#2 Phillips (cross-head) screwdriver
■
Box cutter
■
Because the number and types of I/O modules are determined by the customer, I/O
Note -
modules are shipped in separate boxes.
Follow this procedure for unpacking your Fabric Interconnect:
1.
Locate the shipping list and verify that the following containers are present:
System shipping container
■
I/O module box (1 to 15)
■
HCA box
■
Options box
■
Accessory Kit
■
System information packet
■
Open the containers and verify their contents against the illustration in
2.
"Unpacking Shipping Containers and Examining Contents," on page
Unpack the Fabric Interconnect F1-4
Figure 4,
20.
Installing the Fabric Interconnect
19