Install Fabric Interconnect F1-4 I/O Modules - Oracle Fabric Interconnect Series User Manual

Install Fabric Interconnect F1-4 I/O Modules

Install Fabric Interconnect F1-4 I/O Modules
1. Get the I/O module you will installing, and make sure that the I/O Module is in
the unlocked position. Modules can be inserted into the Fabric Interconnect F1-4
only if they are in the unlocked position.
Make sure that the I/O Module is oriented so that the sheet metal side is facing down and the
module's faceplate is facing you.
Align the module with the slot.
2.
3. Holding the module level, gently insert the I/O module into the chassis (1). See
Figure 94, "Installing a Fabric Interconnect F1-4 I/O Module," on page
FIGURE 94
When the I/O Module is almost completely inserted, you will feel some resistance, which is the
I/O Module's connector meeting its midplane socket. Continue to apply gentle pressure until the
connector is seated in the socket.
146 Oracle Fabric Interconnect Hardware User's Guide • July 2016
Installing a Fabric Interconnect F1-4 I/O Module
146.